CWA 18095:2024

Recyclability of novel and sustainable energy harvesting and storage technologies for IoT and wireless sensor network

 
 

Project Deliverables

 

Project Publications

Publications
Influence of Polyvinylpyrrolidone on Thermoelectric Properties of Melt-Mixed Polymer/Carbon Nanotube Composites
Influence of Polyvinylpyrrolidone on Thermoelectric Properties of Melt-Mixed Polymer/Carbon Nanotube Composites

Beate Krause, Sarah Imhoff, Brigitte Voit and Petra Pötschke

Vibration Energy Harvesting by Means of Piezoelectric Patches: Application to Aircrafts
Vibration Energy Harvesting by Means of Piezoelectric Patches: Application to Aircrafts

Domenico Tommasino, Enrique de Pablo Corona, Federico Moro 1 , Bruno Bernay, Thibault De Lumley Woodyear, and Alberto Doria

Investigation and Computational Modelling of Variable TEG Leg Geometries
Investigation and Computational Modelling of Variable TEG Leg Geometries

Qusay Doraghi,Navid Khordehgah,Alina Żabnieńska-Góra, Lujean Ahmad, LesNorman, Darem Ahmad and Hussam Jouhara

Cyclic Bending Reliability and Failure Mechanism of Printed Biodegradable Flexible Supercapacitor on Polymer Substrate
Cyclic Bending Reliability and Failure Mechanism of Printed Biodegradable Flexible Supercapacitor on Polymer Substrate

Zhao Fu, Markus Hannula, Aarne Jauho, Kaisa-Leena Väisänen, Marja Välimäki, Jari Keskinen, and Matti Mäntysalo

Probing the carrier dynamics of polymer composites with single and hybrid carbon nanotube fillers for improved thermoelectric performance
Probing the carrier dynamics of polymer composites with single and hybrid carbon nanotube fillers for improved thermoelectric performance

Ioannis Konidakis, Beate Krause, Gyu-Hyeon Park, Nithin Pulumati, Heiko Reith, Petra Pötschke, Emmanuel Stratakis

Polyethylene Glycol as Additive to Achieve N-Conductive Melt-Mixed Polymer/Carbon Nanotube Composites for Thermoelectric Application
Polyethylene Glycol as Additive to Achieve N-Conductive Melt-Mixed Polymer/Carbon Nanotube Composites for Thermoelectric Application

Beate Krause and Petra Pötschke

Change of Conduction Mechanism in Polymer/Single Wall Carbon Nanotube Composites upon Introduction of Ionic Liquids and Their Investigation by Transient Absorption Spectroscopy
Change of Conduction Mechanism in Polymer/Single Wall Carbon Nanotube Composites upon Introduction of Ionic Liquids and Their Investigation by Transient Absorption Spectroscopy

Beate Krause, Ioannis Konidakis, Emmanuel Stratakis, and Petra Pötschke

Real Time Vehicle Status Monitoring under Moving Conditions Using a Low Power IoT System
Real Time Vehicle Status Monitoring under Moving Conditions Using a Low Power IoT System

M. Vlachos1, R. Lopardo and A. Amditis

Experimental and computational analysis of thermoelectric modules based on melt-mixed polypropylene composites
Experimental and computational analysis of thermoelectric modules based on melt-mixed polypropylene composites

QusayDoraghi, Alina Żabnieńska-Góra, Les Norman, Beate Krause, Petra Pötschke, Hussam Jouhara

Fabrication of PANI/MWCNT supercapacitors based on a chitosan binder and aqueous electrolyte for enhanced energy storage
Fabrication of PANI/MWCNT supercapacitors based on a chitosan binder and aqueous electrolyte for enhanced energy storage

Ezgi Inci Yesilyurt, Jürgen Pionteck, Frank Simon and Brigitte Voit

Screen printable PANI/carbide-derived carbon supercapacitor electrode ink with chitosan binder
Screen printable PANI/carbide-derived carbon supercapacitor electrode ink with chitosan binder
Screen printable PANI/carbide-derived carbon supercapacitor electrode ink with chitosan binder
Screen printable PANI/carbide-derived carbon supercapacitor electrode ink with chitosan binder

Ezgi Inci Yesilyurt, Jürgen Pionteck, Jari Keskinen, Aapo Kattainen, Timo Punkari, Frank Simon, Matti Mäntysalo, Brigitte Voit

Recyclability of novel energy harvesting and storage technologies for IoT and wireless sensor networks
Recyclability of novel energy harvesting and storage technologies for IoT and wireless sensor networks

Franco Di Persio, María Blecua, Ana Cecilia Chaine, Thomas Daue, Cintia Mateo-Mateo, Ignacio Ezpeleta, Petra Pötschke, Beate Krause, Ezgi Inci, Jürgen Pionteck, Timo Punkari, Jari Keskinen, Matti Mäntysalo, Amanda Melo, David Esteves

Assessment of a Cyclic Bending Test Method for Printed Flexible Supercapacitor
Assessment of a Cyclic Bending Test Method for Printed Flexible Supercapacitor

Zhao Fu, Aarne Jauho, Kaisa-Leena Väisänen, Marja Välimäki, Jari Keskinen, Matti Mäntysalo

Optimization of a piezoelectric wind-excited cantilever for energy harvesting from facades
Optimization of a piezoelectric wind-excited cantilever for energy harvesting from facades

Domenico Tommasino, Federico Moro, Enrique de Pablo Corona, Laura Vandi, Alessia Baietta, Alessandro Pracucci, Alberto Doria

An Analytical–Numerical Method for Simulating the Performance of Piezoelectric Harvesters Mounted on Wing Slats
An Analytical–Numerical Method for Simulating the Performance of Piezoelectric Harvesters Mounted on Wing Slats

Domenico Tommasino, Federico Moro, Eneko Zumalde, Jan Kunzmann, Alberto Doria

Experimental and numerical analysis of the influence of the heat exchanger shape on the performance of a TEG module
Experimental and numerical analysis of the influence of the heat exchanger shape on the performance of a TEG module

Hussam Jouhara, Alina Żabnieńska-Góra, Qusay Doraghi, Beate Krause, Petra Pötschke, Cintia Mateo-Mateo, Ignacio Ezpeleta, Mauro Brignone, Emanuele Milani

Experimental and computational thermoelectric generator for waste heat recovery for aeronautic application
Experimental and computational thermoelectric generator for waste heat recovery for aeronautic application

Qusay Doraghi, Alina Żabnieńska-Góra, Gabriele Voto, Fabrice Simoes Loureiro, Beate Krause, Petra Pötschke, Cintia Mateo-Mateo, Ignacio Ezpeleta, Hussam Jouhara

Integration of Piezoelectric Energy Harvesting Systems into Building Envelopes for Structural Health Monitoring with Fiber Optic Sensing Technology
Integration of Piezoelectric Energy Harvesting Systems into Building Envelopes for Structural Health Monitoring with Fiber Optic Sensing Technology

Alessandro Pracucci, Laura Vandi, Francesco Belletti, Amanda Ramos Aragão Melo, Marios Vlachos, Angelos Amditis, Maria Teresa Calcagni, David Seixas Esteves

Structural Health Monitoring for Prefabricated Building Envelope under Stress Tests
Structural Health Monitoring for Prefabricated Building Envelope under Stress Tests

Laura Vandi, Maria Teresa Calcagni, Francesco Belletti, Giuseppe Pandarese, Milena Martarelli, Gian Marco Revel, Vincent Docter, Alessandro Pracucci

Experimental and computational thermoelectric generator for waste heat recovery for aeronautic application
Experimental and computational thermoelectric generator for waste heat recovery for aeronautic application

Qusay Doraghia, Alina Zabnieńska-Góra, Gabriele Voto, Beate Krause, Petra Pötschke, Ignacio Ezpeleta, Cintia Mateo-Mateo, Hussam Jouhara

Monolithic Supercapacitor Fabrication With Screen-printing
Monolithic Supercapacitor Fabrication With Screen-printing

Timo Punkari

Polyaniliini-aktiivihiili-komposiitti Painettavan Superkondensaattorin Elektrodimateriaalina
Polyaniliini-aktiivihiili-komposiitti Painettavan Superkondensaattorin Elektrodimateriaalina

Aapo Kattainen

Monolithic supercapacitors prepared by roll-to-roll screen printing
Monolithic supercapacitors prepared by roll-to-roll screen printing

Timo Punkari, Aapo Kattainen, Alexandre Fonseca, Joana Pronto, Jari Keskinen, Matti Mäntysalo
a Tampere University, Tampere, Finland
b Centre for Nanotechnology and Smart Materials, Vila Nova de Famalicão, Portugal

Screen printed monolithic supercapacitor with talc and cellulose fiber separator
Screen printed monolithic supercapacitor with talc and cellulose fiber separator

Timo Punkari, Jari Keskinen, Aapo Kattainen, Jarmo Laakso, Mari Honkanen, Matti Mäntysalo